Olivetti 16MF Manuel D’Utilisation
Preparation
BASIC OPERATION GUIDE
2-11
Connecting to a Parallel or USB Interface
To connect the machine directly to your computer, use a parallel cable or
a USB cable.
a USB cable.
IMPORTANT: Always power off the machine (
{
) and remove the power
cord from the outlet before connecting the printer cable.
Ensure your computer is also switched off.
1
Open the main power switch
cover on the right side of the
machine and press the Power
Switch to Off (
cover on the right side of the
machine and press the Power
Switch to Off (
{
), then remove
the power cord from the outlet.
2
Connect the printer cable (not
included) to the Parallel Interface
Connector or USB Interface
Connector located on the right
side of the machine.
included) to the Parallel Interface
Connector or USB Interface
Connector located on the right
side of the machine.
NOTE:
Use a USB cable that complies with Revision 2.0 of USB
standard (a rectangular Type A plug and a square Type B plug).The USB
cable should be shielded and not be longer than 5 meters (16 feet).
cable should be shielded and not be longer than 5 meters (16 feet).
3
Connect the other end of the printer cable to the Parallel Interface
Connector or USB Interface Connector on your computer.
Connector or USB Interface Connector on your computer.