Olivetti P20W Manuel D’Utilisation
Network Configuration> 14
The following section explains each tab’s functionality.
Depending on your printer, some items in the following
explanation may not be displayed.
Depending on your printer, some items in the following
explanation may not be displayed.
General Tab
This allows you to set or change the
root password used for Admin
Manager, TELNET and FTP.
root password used for Admin
Manager, TELNET and FTP.
TCP/IP Tab
This allows you to configure TCP/IP related items.
ITEM
EXPLANATION
Change root
password
password
You can set/change the
root password for
AdminManager, TELNET
and FTP.
root password for
AdminManager, TELNET
and FTP.
ITEM
EXPLANATION
Use TCP/IP
Protocol
Protocol
Set TCP/IP protocol as enabled/disabled.
Use DHCP/
BOOTP
BOOTP
Check this item if IP address, subnet mask, default
gateway and IP addresses for DNS primary server
and secondary servers are retrieved from the DHCP
or BOOTP server. Otherwise, uncheck.
gateway and IP addresses for DNS primary server
and secondary servers are retrieved from the DHCP
or BOOTP server. Otherwise, uncheck.
Use RARP
Check this item if IP address is retrieved from the
RARP server. Otherwise, uncheck.
RARP server. Otherwise, uncheck.
IP Address
Set the IP address of the selected network interface
card.
card.
Subnet Mask
Set the subnet mask of the selected network
interface card.
interface card.