Olivetti PG L230 Manuel D’Utilisation

Page de 64
Troubleshooting 
OPERATION GUIDE
4-5
Error Messages
The following table lists errors and maintenance messages that you can be 
dealt with by yourself. If Call service appears, turn off the printer, 
disconnect the power cord, and contact your service technician.
Some errors cause the alarm to sound. To stop the alarm, press [Cancel]
Message
Corrective Action
Add paper MPTray
The paper has run out in the paper source displayed. Supply paper according to 
the paper source displayed (paper cassettes, MP tray, optional paper feeders, or 
optional envelope feeder [PG L235/L245]).
This message is displayed alternately with messages indicating the printer status, 
such as, Ready, Please wait, Processing, Waiting, and FormFeed Time 
Out
.
Call service
 
     F###
F###
 represents a controller error (#=0, 1, 2, ...). Call for service. The printer does 
not operate when this message is displayed.
 
Call service
 
    ####:0123456
####
 represents a mechanical error (#=0, 1, 2, ...). Call for service. The printer 
does not operate when this message is displayed. The total number of pages 
printed is also indicated, e.g. 0123456.
Cassette # 
 
not loaded
The corresponding paper cassette is not installed. Install the cassette. The 
cassette number can be 1 (topmost) to 4 (bottom) [PG L230: 1 and 2].
 
Check waste 
 
toner box
This message warns following two cases. Install the new waste toner box.
The waste toner box is not installed. 
The waste toner box is full.
Clean printer 
Press GO
Please clean the inside of the printer. Refer to Cleaning the Printer on page 3-8.
This message will be displayed when replacing the toner container after the 
message Replace toner is displayed. After cleaning the inside of the printer, 
press [GO] and the printer will be ready for printing.
Close
 
left cover
The left cover of the printer is open. Close the left cover.
 
 
Close
 
rear unit
The rear unit of the printer is open. Close the printer rear unit.
 
 
Close
 
top cover
The top cover of the printer is open. Close the printer top cover.
 
 
Duplex disabled
 
Press GO
You attempted to print with a paper size and paper type that cannot be used for 
duplex printing. Press [GO] to print onto one-side of the paper only.