Fujitsu DL3750+/3850+ Manuel D’Utilisation

USING SETUP MODE

User's Manual

5-51

The SELF-TST function prints test pages to check how the printer operates

independently of your computer.  The self-test does not check the interface

between the computer and the printer.

The self-test prints the printer’s firmware version, its resident emulations,

and all of the characters available in the currently selected character set.  If

the DPL24C PLUS emulation is selected for MENU1, the self-test is printed

using the settings currently assigned to MENU1.

This procedure assumes that you are in setup mode.  To print the self-test,

make sure that continuous forms paper is loaded into the printer.  Then

proceed as follows:

1. Print the <<FUNCTION>> menu.

The <<FUNCTION>> menu should be the last printed line on the

page.  If the menu is not printed, press the ONLINE button to print

the menu.  If you are using the HEX-DUMP function, press the LF/

FF button instead of the ONLINE button to print the menu.  The

following <<FUNCTION>> menu is printed:

<<FUNCTION>>

  SAVE&END  MENU1  MENU2  HARDWRE  ADJUST  CONFIG  DEFAULT  LIST   SELF-TST  HEX-DUMP

  V-ALMNT