Olivetti 250MF Manuel D’Utilisation
Basic Operation
BASIC OPERATION GUIDE
3-19
Auto Sleep Mode
Auto Sleep mode puts the machine into a state of sleep if no operation has
been performed for a preset period of time. The factory default setting is
30 minutes (16 and 20 ppm models) and 45 minutes (25 ppm model).
been performed for a preset period of time. The factory default setting is
30 minutes (16 and 20 ppm models) and 45 minutes (25 ppm model).
Time that can be set:
•
Inch Specification — 1 to 240 minutes (in 1 minute increments)
•
Metric Specification — 1 to 120 minutes (in 1 minute increments)
NOTE:
It is possible to set the amount of time before Auto Sleep mode
engages. For details, refer to Chapter 3, Advanced Operation Guide.
It is possible to engage Auto Sleep mode manually:
1
Press [Power]. Auto Sleep mode
engages immediately.
engages immediately.
Only the Main Power indicator is
lit, all other indicators are off.
lit, all other indicators are off.
Consumed power is this mode is
less than in Low Power mode
less than in Low Power mode
2
To enable copying again, press [Power]. Power is restored within
approximately 20 seconds.
approximately 20 seconds.
NOTE:
In Auto Sleep mode, if the machine receives print or fax data it
will automatically engage and output the data.