Olivetti PG L26 Special Manuel D’Utilisation

PG L26/PG L26 Special User’s Guide – Paper recommendations > 47

The normal paper path from a main paper tray to the top output 
stack involves two complete U-turns. This may sometimes cause 
very heavyweight paper or cardstock to jam or misfeed.

Use the Manual Feed Tray to feed this type of paper and the Rear 
Output Stacker to collect printed output. This gives a nearly 
straight paper path through the machine and may prove more 
reliable in this type of application.

The process used to fuse (fix) the printed image to the paper 
involves a mixture of pressure and heat. Too much heat will 
cause lightweight paper to crease or curl and corrugations in 
transparencies. Too little heat will cause the image not to fuse 
fully into heavyweight paper.

The print quality for different types of paper is adjusted by 
changing the media type as follows:

Start the Status Monitor.

Select the Printer Setup tab and click on the Printer 
Menu button. 

Select the Paper tab. Click on the button for the paper 
tray being used. Adjust the media type to the required 
setting and, if necessary, the paper size to the size of the 
paper being used.

Click on the Apply button, Close button then OK button 
to set the printer to the new media type and printing 
quality.