Olivetti PG L26 Special Manuel D’Utilisation

PG L26/PG L26 Special User’s Guide – Consumables and maintenance > 73

Replace the toner cartridge after Toner Low displays in the printer 
Status Monitor. Also, the Error LED indicator slowly blinks when 
toner is low. After Toner Low displays, the printer will print about 
100 more pages then display Toner Empty and stop printing. 
Printing will resume after a new toner cartridge has been 
installed.

When the toner is running low, TONER LOW is displayed in the 
operator panel LCD. If printing continues without replacing the 
toner cartridge, CHANGE TONER is displayed and printing is 
cancelled. Printing will resume after a new toner cartridge has 
been installed.

It is recommended that you clean the LED array at the same time 
as you change the toner cartridge.

The toner used in this printer is a very fine dry powder contained 
in the toner cartridge.

Have a sheet of paper handy so that you have somewhere to 
place the used cartridge while you install the new one.

Dispose of the old cartridge responsibly, inside the pack that the 
new one came in. Follow any regulations, recommendations, etc., 
which may be in force concerning waste recycling.

If you do spill any toner powder, lightly brush it off. If this is not 
enough, use a cool, damp cloth to remove any residue. Do not 
use hot water, and never use solvents of any kind. They will make 
stains permanent.