Olivetti PG L26 Special Manuel D’Utilisation

PG L26/PG L26 Special User’s Guide – Installing options > 86

The following options are available to extend the performance of 
your printer:

10/100 BASE-TX Network Interface Card: to make the 
PG L26 and PG L26 Special network compatible

16, 32, 64, 128, 256MB RAM DIMM: to extend the main 
memory of your printer and speed up the processing of 
large files

RS232C Card: to provide serial interface capability for the 
PG L26 and PG L26 Special

Second paper tray: to increase your printer’s paper 
handling capacity by 500 sheets (80g/m²)

Multi Purpose Tray: to extend the range of media your 
printer can accommodate (capacity 100 sheets (80g/m²) 
or 50 envelopes)

One of the following can be added:

(a)

8MB Flash DIMM: to allow the storage of additional 
fonts or bar codes for the PG L26, PG L26 Special

(b)

16MB Flash DIMM: to allow the storage of additional 
fonts or bar codes for the PG L26, PG L26 Special

(c)

PostScript PS level 3 DIMM: to add PostScript 
emulation to the PG L26 Special. Cannot be added in 
conjunction with extra flash memory. 

(d)

The PG L26 Special PS option is supplied as 2 
DIMMs: a PS DIMM and a 16MB RAM DIMM. When 
fitted into a basic

 

PG L26 Special (i.e. one with no 

memory upgrade already fitted) the PS DIMM will 
expand into the 16MB RAM DIMM in order to work, 
and the amount of memory available for general 
operation of the printer will therefore not change. It 
will remain at 16MB, which is the printer's base 
memory.

(e)

If you require to install a PS upgrade into a 
PG L26 Special which already has a memory upgrade 
installed, discard the 16MB RAM DIMM which ships 
with the PS option and install only the PS DIMM. The