HP (Hewlett-Packard) 70 Manuel D’Utilisation
Program the Pattern Generator Output
The Sequence window is used to program the pattern generator output. In
this exercise, you will change the base field to binary and program the first
"walking one."
this exercise, you will change the base field to binary and program the first
"walking one."
1
Highlight the
Pat Gen Format
field, and press the
Select
key.
2
Highlight
Pat Gen Sequence
field in the pop-up menu, and press the
Select
key.
3
Highlight the base field below the PATGEN field, and press the
Select
key. Highlight
Binary
in the pop-up menu, and press the
Select
key.
4
Use the knob to scroll to the field under
***MAIN SEQUENCE START***.
***MAIN SEQUENCE START***.
5
Use the arrow keys to highlight the far-right field.
6
Press the
Select
key. Type 0001 and press the
Done
key.
Programming the Pattern Generator Output
Result
The base field is in binary with the first "walking one" of 0001 programmed.
Using the Pattern Generator
Program the Pattern Generator Output
Program the Pattern Generator Output
9-12