HP (Hewlett-Packard) 70 Manuel D’Utilisation
Clear the Timing Analyzer Trigger
Clearing the timing analyzer trigger sets the specification to "don’t care". By
doing this, the timing analyzer will trigger as soon as it is armed by the state
analyzer.
doing this, the timing analyzer will trigger as soon as it is armed by the state
analyzer.
1
Press the
Trigger
MENU key.
2
Highlight the
Modify Trigger
field on the right side of the screen, and
press the
Select
key.
3
Highlight the
Clear Trigger
field, press the
Select
key, and choose
All
from the pop-up menu.
Result
The timing analyzer trigger specification is set to a "don’t care" state.
Set Up the State Trigger Specification
1
Press the
Trigger
MENU key. Highlight
Trigger MACHINE 1
in the pop-up
menu, and press the
Select
key. The Trigger MACHINE 1 menu is
now displayed. If this is not the case, press the
Trigger
MENU key
again, then choose
Trigger MACHINE 1
from the pop-up menu.
2
Highlight the
1
field in the State Sequence Levels box of the Trigger
menu. Press the
Select
key.
3
Highlight the field to the right of
While storing
, and press the
Select
key.
Highlight
anystate
in the pop-up menu, and press the
Select
key.
4
Press the
Done
key to close the Sequence Level 1 pop-up menu.
Result
The state analyzer trigger specification is now:
Level 1 - While storing "anystate", TRIGGER on "a" 1 time
Level 2 - Store "anystate"
The trigger term "a" is assigned the hex value FF.
Mixed Mode - Correlation of State and Timing Data
Clear the Timing Analyzer Trigger
5-7