HP (Hewlett-Packard) 70 Manuel D’Utilisation
Get the Waveform on the Display
The first step when using an oscilloscope is to get the waveform on the
display. Autoscale is an algorithm that automatically optimizes the display of
one or more waveforms. The oscilloscope triggers at an arbitrary point until
you set up the trigger conditions.
display. Autoscale is an algorithm that automatically optimizes the display of
one or more waveforms. The oscilloscope triggers at an arbitrary point until
you set up the trigger conditions.
1
Press the
Config
key.
2
Highlight the field in the top, left corner of the display, and press the
Select
key. Highlight
Scope
in the pop-up menu, and press the
Select
key.
3
Highlight the
Autoscale
field and press the
Select
key. Highlight
Continue
in the pop-up menu and press the
Select
key.
Running the Oscilloscope with Autoscale
Result
The waveform is on the display with the trigger occurring on a rising edge.
The arbitrary trigger
point happens to be on a
rising edge.
point happens to be on a
rising edge.
The glitch you will
capture with the timing
analyzer and the
oscilloscope.
capture with the timing
analyzer and the
oscilloscope.
Triggering the Oscilloscope with the Timing Analyzer
Get the Waveform on the Display
Get the Waveform on the Display
8-6