HP (Hewlett-Packard) 510 Manuel D’Utilisation

accessories

hp digital copier series

29

replace an 

existing ADF 

lid

If you remove the ADF lid for any reason, you can easily replace it. 

to remove the ADF lid

1

Gently pull the ADF input tray straight out.

2

Open the ADF lid.

3

Pull up both tabs.

4

Remove the ADF lid by gently pulling it slightly forward as you lift.

5

Follow the steps, above, labeled “to install the ADF.”

use the ADF

1

Place all originals in the ADF input tray print-side up. 

2

Adjust the paper-width guide to fit the size of your original.
A message appears on the display indicating that the originals are 

loaded.

two-sided printing accessory

This accessory can be used with or without the optional 250-sheet plain 

paper tray to provide dual-sided copying capability and dual paper tray 

capacity. The 250-sheet plain paper tray can handle 250 sheets of copier 

letterhead and bond paper. You must use the main paper tray to load 

transparency film, photo paper, or other coated stock.

Tip! You must have the two-sided printing accessory installed 

to use the optional 250-sheet plain paper tray.

attach the two-

sided printing 

accessory

1

Turn the knob on the rear access door of your HP Digital Copier 

counterclockwise, then remove the door.

hinges

tab above 

each hinge

GwenRG.book  Page 29  Thursday, January 31, 2002  5:20 PM