IBM TI2 Manuel D’Utilisation
Table 19. Fonts for Models TI1 and TI2
Bit 0
Bit 1
User-Defined Thermal
Code Page
Code Page
User-Defined Impact Code
Page @ Density
Page @ Density
Resident
Thermal
Thermal
Resident
Impact
Impact
0
0
Code Page 1
Code Page 1 @ 150 half-dots
per inch
per inch
Font A
Font A
1
0
Code Page 2
Code Page 1 @ 120 half-dots
per inch
per inch
Font B
Font B
0
1
Code Page 3
Code Page 2 @ 150 half-dots
per inch
per inch
Font A
Font A
1
1
Code Page 4
Code Page 2 @ 120 half-dots
per inch
per inch
Font B
Font B
Default:
n = 00
Remarks:
v
For thermal printing with resident character sets:
Font A = 10-dots (wide) × 20 dots (high) or 1.25 mm × 2.5 mm
Font B = 12-dots (wide) × 24 dots (high) or 1.5 mm × 3.0 mm
Font C = 8 dots (wide) × 16 dots (high) or 1.0 mm × 2.0 mm
Font C, starting with level 38 micro code = 8-dots (wide) x 20 dots (high)
or 1.0 mm x 2.5 mm
or 1.0 mm x 2.5 mm
v
For impact printing:
Font A = dot density of 150 half-dots per inch (resident characters = 1.2
mm × 2.5 mm).
mm × 2.5 mm).
Font B = dot density of 120 half-dots per inch (resident characters = 1.5
mm × 2.5 mm).
mm × 2.5 mm).
Emphasized printing enable and disable, and font A or font B selection
must be at the beginning of a print line to be recognized.
must be at the beginning of a print line to be recognized.
User-defined characters greater than 9 dots high can not be printed
double high in landscape mode or in the portrait mode of Models TI1 and
TI2.
double high in landscape mode or in the portrait mode of Models TI1 and
TI2.
Double-high and emphasized characters are not valid in landscape
mode.
mode.
v
Invert can not be used with overline or underline.
v
See “Character fonts” on page 98, “Download user-defined characters”
on page 118, “Set print station” on page 134, and “Select user-defined or
resident character sets” on page 134 for related information.
on page 118, “Set print station” on page 134, and “Select user-defined or
resident character sets” on page 134 for related information.
Example:
Print mode set to font B, emphasized and underlined enabled (n = 89 hex).
Set or cancel double-wide mode
EIA-232 Syntax:
ESC W n or X'1B;57;n'
where:
n=00
Cancel double-wide mode
n=01
Set double-wide mode
Updated April 2, 2009
130
SureMark Printers User’s Guide