Hitachi C9295A#B1H Manuel D’Utilisation

Try the following solutions to resolve the issue. Solutions are listed in order, with the most
likely solution first. If the first solution does not solve the problem, continue trying the
remaining solutions until the issue is resolved.

•

•

•

•

•

Solution: Open the document file in your software application and remove any extra
pages or lines at the end of the document.

Cause: The document you were printing contained an additional blank page.
If this did not solve the issue, try the next solution.

Solution: If the product has only a few sheets remaining, load more paper in the
input tray. If there is plenty of paper in the input tray, remove the paper, tap the stack
of paper against a flat surface, and reload the paper into the input tray.
For more information, see:

Cause: The product picked up two sheets of paper.

Solution: The ink cartridges may be running low on ink.
Cause: Ink levels are too low.

Solution: Complete the printhead cleaning procedure. For more information, see

. The printhead may need to be cleaned if the printer was turned

off improperly.

NOTE: Turn off the HP Printer by pressing the Power button located on the
product. Wait until the Power light turns off before unplugging the power cord or
turning off a power strip. If you improperly turn off the HP Printer, the print carriage
might not return to the correct position causing problems with the ink cartridges
and print quality issues.

Cause: The printhead was clogged.

Print troubleshooting

79