Genicom 3850 Manuel D’Utilisation
122
2. The Front2 Push tractor assembly must be installed as shown in figure.
To select the Front2 Push paper path, press the
PATH
key until the Front 2 led is turned on.
1. To remove the Front2 Push
tractor assembly, turn the printer
off.
off.
2. Take the connector cable off and
press on the push buttons
(located in the Front2 Push
tractor latches) to disengage the
tractor assembly.
(located in the Front2 Push
tractor latches) to disengage the
tractor assembly.
P u sh B utton