IBM 1220 Manuel D’Utilisation
64
29
Restoring factory default settings
1
Make sure the printer is on and the
Ready
message appears.
2
Press
Menu
until you see Utilities Menu, and then press
Select
.
3
Press
Menu
until you see Factory Defaults, and then press
Select
.
4
When Restore appears, press
Select
. The message
Restoring Factory Defaults
appears followed by the
Ready
message.
When you select Restore:
–
No other button actions are available on the operator panel while
Restoring Factory
Defaults
appears.
–
All downloaded resources (fonts, macros, and symbol sets) in printer memory (RAM) are
deleted. (Resources residing in flash memory or on the optional hard disk are unaffected.)
deleted. (Resources residing in flash memory or on the optional hard disk are unaffected.)
–
All menu settings are returned to the factory default values, except:
•
The operator panel Display Language setting in the Setup Menu.
•
All settings in the Parallel Menu, Serial Menu, Network Menu, Infrared Menu,
LocalTalk Menu, and USB Menu.
LocalTalk Menu, and USB Menu.
If you need more information about changing menu settings or selecting new user default settings, see