Zebra Technologies TTP 7030 Manuel D’Utilisation

Specifications
Bar Codes (Non-Windows Applications)

P1003636-002

TTP 7030™ Technical Manual

10/05/2009

Orientation

Horizontal and vertical

Symbology

EAN, UPC, Interleaved 2-of-5, ISBN, Code39, and Code 128

Add-on

2, or 5 digit add-on can be added to EAN, UPC codes
5 digit add-on can be added to ISBN

Paper width

80 mm or 112 mm depending on model

Printout length

75–500 mm before partially ejecting printout. No upper limit 
for printout length. (112-500mm for Retract-and-retain 
versions of the printer)

Cutting

Guillotine cutter

Presenter operation

Stores the printout until it is fully printed and cut, then 
presents part of the printout to the customer. When the 
customer pulls the ticket, a sensor reacts on the pull and feeds 
out the full printout. Extremely long printouts can be partially 
ejected to limit loop buildup.

Eject length after cut

Programmable eject length. Full eject, or printout held until 
the customer removes it. Eject of uncollected printouts. 

Printout retraction

Optional retract and retain function pulls back uncollected 
printouts and throws them in a wastebasket inside the kiosk.

Paper loading

Automatic feed, cut, and eject when paper is detected. 
Automatic "on-line" after successful paper load. 
Automatic synchronization to Top-of-form marks when 
black-mark mode is selected in the parameter setup.

Sensors

Optical sensors: Out of paper, paper left in presenter, paper 
pulled, paper near end (optional) and weekend level sensor 
(optional). 
Switch sensors: Cutter not in home position and print head 
lifted.