Sony LPR-1000MD Manuel D’Utilisation

P

re

parat

io

n

Turning the Printer On/Off

10

Set the main power switch placed on the back of the 
printer to the OFF (a) side.

Be sure not to set the main power switch to the OFF (a) 
side directly. Set the printer to standby mode once, and 
then set the main power switch to the OFF (a) side. The 
printer turns the power off after it performs maintenance 
so that it will start in good condition when the power is 
turned on next time.

You can confirm the status of the printer according to the 
lighting status of the ON/STANDBY and READY 
indicators placed on the front panel.

The printer is turned off.

The printer is in standby 
mode.

Initializing (Starting)
Wait for a while.

Print mode
The printer is ready to print.

The printer is cleaning the 
print head. Or the printer 
has stopped printing 
temporarily because the 
READY button was pushed 
while printing was in 
progress.

Not lit

Not lit

Not lit

Lit
(Orange)

Not lit

Blinks
(Orange)

Lit
(Green)

Lit
(Green)

Blinks
(Green)

Lit
(Green)

The printer is in setting 
mode, confirming mode or 
maintenance mode.
The printer cannot print.

The ON/STANDBY button 
was pushed while printing 
was in progress.
After completing a print 
job, the printer goes to 
standby mode.

Set the main power switch 
placed on the back of the 
printer to the OFF side, 
then set it to the ON side 
again.
If the printer does not start 
correctly even after you 
perform the above 
operation, the printer has 
malfunctioned. Contact 
your dealer.

An error has occurred.
The error message is 
displayed on the printer 
window display.
Solve the problem, 
referring to “Error 
Messages” on page 54.

Not lit

Lit
(Green)

Blinks
(Green)

Blinks
(Green)

Lit
(Green)

or

Lit
(Orange)

Lit
(Green)

Blinks
(Orange)

Lit
(Green)