Sony LPR-1000MD Manuel D’Utilisation

Ma
in

te

na
nc
e

Replacing the Head Cleaning Roller

46

This section explains how to replace the head cleaning 
roller.
Use an EPA-5CR head cleaning roller (not supplied).

• When replacing the cleaning roller, keep the power of 

the printer on. Before replacement, be sure to remove 
the auto sheet feeder tray.

• When replacing the cleaning roller, be careful of ink 

stain around the head cleaning roller and the head 
cleaning unit. The ink may stain your hands and 
clothes.

• We recommend that you put on gloves when replacing 

the cleaning roller.

• Do not press buttons on the printer during 

replacement.

Remove the auto sheet feeder tray.

Push the MENU button.
The READY indicator goes out and the message 
“Ink level/Black (BL)” appears on the printer 
window display.

Push the MENU button or the m/M button and 
hold it until the message “Replace roller.” appears 
on the printer window display.

Push the SET button.
The message “Replace?/Yes_” appears on the 
printer window display.

If the message “Replace?/No_” appears
Display “Yes_” by pressing the m/M button, 
and then push the SET button.

Push the SET button.
The message changes from “Warming up” to 
“Ready to replace”, and then, after several seconds, 
the message “End?/Yes” appears.

While the cleaning roller is being replaced, the 
message “Ready to replace.” or “End?/Yes.” 
appears.
At this time, do not open the main cover. If you 
open the main cover, this may cause the printer to 
malfunction.

Remove the used head cleaning roller in use as 
follows.

1

Put on the glove supplied with the head 
cleaning roller.

Cursor