Zebra Technologies 3ULQWHUV Manuel D’Utilisation

Troubleshooting

Zebra XiIIIPlus Users Guide

127

There is not enough memory to 
perform the function shown on the 
second line of the error message.

‡Shut off the printer to clear memory and 

try to print again.

‡If the error recurs, there is insufficient 

memory for the label length, downloaded 
fonts or graphics, and images.

‡Ensure that the device, such as Flash 

memory or PCMCIA card, is installed and 
not write-protected or full.

‡Ensure that the data is not directed to a 

device that is not installed or available.

You are using an incorrect labels and 
ribbon combination for your 
application.

Consult your authorized Zebra reseller 
ordistributor for information and advice.

The printer is set at the incorrect print 
speed.

For optimal print quality, set the print speed 
to the lowest possible setting via ZPL II, the 
driver, or the software.

The printer is set at the incorrect 
darkness level.

For optimal print quality, set the darkness to 
the lowest possible setting via the front 
panel, the driver, or the software.