Zebra Technologies 3ULQWHUV Manuel D’Utilisation
![Zebra Technologies](https://files.manualsbrain.com/attachments/a78f49d565a2596a8b31f4240e25fed2998da2a0/common/fit/150/50/2656e56263d759e2c7910989c000585d7bce0fb5d50f1f63705e38675fa7/brand_logo.gif)
20
Zebra
XiIIIPlus Users Guide
Printer Setup and Calibration
Before You Begin
• No, a label did not print. Sensors out of position is a common cause of printing
problems.
6HQVRU$GMXVWPHQW
Adjust sensors only when the printer cannot detect the top of the label. The front panel
LCD displays
LCD displays
(5525&21',7,213$3(5287, even though there are labels loaded in
the printer.
7UDQVPLVVLYH6HQVRU
The transmissive sensor consists of two sections: a light source (the lower media
sensor) and a light sensor (the upper media sensor). The media passes between the two.
sensor) and a light sensor (the upper media sensor). The media passes between the two.
The upper media sensor must be positioned:
• Directly over the hole or notch, or
• Anywhere along the width of the media if there is a gap between labels.