Sony SX-215 Manuel D’Utilisation
User’s Guide
Pushbutton Functions
The front edge of the print server provides a momentary pushbutton that can be used to print a
test/configuration page or reset the device to factory default settings.
test/configuration page or reset the device to factory default settings.
Action
Function
Press pushbutton for > 1/8 second but < 5
seconds
seconds
Prints a test/configuration page on each connected port
Press pushbutton for > 5 seconds
Resets the device configuration to factory defaults. The
unit will reinitialize itself after updating the
configuration memory.
unit will reinitialize itself after updating the
configuration memory.
Factory Default Settings
The SX-200 Series Print Server is shipped with a default configuration. The settings can be changed to
suit specific installation requirements via the ExtendView Utility, or other SNMP-based utilities, the
embedded Web server, or via a Telnet connection to the Print Server’s internal console. The factory
default settings can be easily restored at any time by performing a cold reset (press and hold the
pushbutton on the device for more than five seconds).
suit specific installation requirements via the ExtendView Utility, or other SNMP-based utilities, the
embedded Web server, or via a Telnet connection to the Print Server’s internal console. The factory
default settings can be easily restored at any time by performing a cold reset (press and hold the
pushbutton on the device for more than five seconds).
Default Settings (wired and wireless print servers)
Parameter
Setting
IP Address
190.0.0.192
TCP/IP Method
AUTO (BootP and DHCP are enabled)
Password
access
Wireless Default Settings (wireless print servers only)
Parameter
Setting
Wireless Mode
Ad-Hoc (peer-to-peer)
RF Channel
11
SSID
printer (lower case)
Document #40181-420 Rev. B
12