Zebra Technologies 79695L-002 Manuel D’Utilisation
![Zebra Technologies](https://files.manualsbrain.com/attachments/a78f49d565a2596a8b31f4240e25fed2998da2a0/common/fit/150/50/2656e56263d759e2c7910989c000585d7bce0fb5d50f1f63705e38675fa7/brand_logo.gif)
Routine Maintenance
Cleaning Procedures
Cleaning Procedures
108
79695L-002 Rev. A
Z Series
®
/RZ™ Series User Guide
6/6/08
Clean the Cutter Module
If the cutter is not cutting the labels cleanly or if it jams with labels, clean the cutter.
To clean the cutter module, complete these steps:
1.
Turn the printer off (O), and unplug the printer from its power source.
2.
Remove the cutter shield (
1
) by removing the cutter shield thumbscrew and lock
washer (
2
).
3.
To expose the V-shaped cutter blade, turn the cutter motor thumbscrew (
1
)
counterclockwise to lower the blade.
Caution •
For personnel safety, always power off and unplug the printer before performing
this procedure.
Caution •
The cutter blade is sharp. Do not touch or rub the blade with your fingers.
1
2
1