Sony UP-DR100 Manuel D’Utilisation

O

per

at

ion

Printing from the Computer

15

• Turn the printer on first.
• Don’t turn the printer on again within 5 seconds 

after turning it off. 

• Do not turn the computer off and on again while 

it is accessing a hard or floppy disk.

Send the image data from the computer to be 
printed.
The printer starts printing.

1

While the printer is receiving the image data, 
the following message should appear.

: Indicates 20% of the total amount of image 

data. In the above example, 60% of the total 
amount of image data has been transferred.

2

The printer starts printing the transferred image 
data as soon as the print command is sent from 
the computer.
The PRINT indicator lights and the following 
message should appear.

3

After printing is finished, the printed paper is 
ejected from the output slot.
The printing time depends on the print size, ink 
ribbon and the paper.
Once printing has been completed, the PRINT 
indicator goes off and READY appears on the 
information display again.

Do not open the maintenance door while the printer is 
printing. Doing so may have an influence on the quality 
of the printout.

Press and hold the FEED button for more than one 
second. The page currently being printed is completed 
and ejected. After the printout is ejected, the information 
display returns to READY. The image data stored in the 
memory and the number of printings set in the queue are 
cancelled.

Since the printer has memory for image data spooling, 
image data to be printed can be transferred to the printer 
while printing an image. 

R35

UPC-R35/R35A

R46

UPC-R46/R46A

R57

UPC-R57/R57A

R68

UPC-R68A

Indicates the image data is being 
transferred.

The color indication changes as the color printing 
procedes:
Start

t

YELLOW

t

MAGENTA

t

CYAN

t

LAMI

t

Finsih.

Number of pages to be printed