Kodak 8660 Manuel D’Utilisation

Page de 120
 
Part No. 6B4389
June 1999
1-1
 
1
Introduction
 
About this Guide
 
This guide provides instructions for network administrators on installing 
the Kodak Professional 10/100 network interface card in the Kodak 
Professional 8660 and 8670 PS thermal printers and configuring the 
printers for use over a network. This guide also provides instructions on 
configuring workstations to send jobs to the printers.
 
About the Network Interface Card
 
The Kodak Professional 10/100 network interface card (NIC) is an integral 
PCI bus compatible print server that allows a printer to be shared on an 
Ethernet 10 MB or Fast Ethernet 100MB network. Because the NIC has 
multiprotocol capabilities, users with computers running different network 
operating systems can simultaneously access the same printer. 
Before you install the NIC in the printer, unpack and set up your printer 
and install the printing software on each workstation that will send jobs to 
the printer.
 
Features 
 
The NIC has the following features: 
connects to either a 10BaseT or 100Base TX Fast Ethernet network 
and autodetects the network type. 
contains flash memory for updating the firmware.
contains a serial port to connect a console terminal or a serial printer.
connects to the printer through a 33MHz 32-bit PCI bus. 
is configurable remotely using a Web browser.
is compatible with Hewlett-Packard’s JetAdmin NetWare, Windows 95 
Peer-to-Peer printer management software, and XAdmin Windows-
based NetWare management utility.
has remote console capability management using Telnet or NetWare.
contains IP security to restrict printing based on IP address