Kodak 8660 Manuel D’Utilisation

 

Installing the Hardware

 

2-4

Part No. 6B4389June 1999Au-

7. Hold the card so that the network cable receptacle is toward 

the slot cover. Tilt the card slightly and slide the face plate 
connector against the slot. 

8. Position the printer interface connectors against the 

receptacles on the motherboard to seat the NIC. Press the NIC 
gently into place.

9. Install the screws that held the faceplate in place to secure the 

NIC.

10. Install the back cover and the 4 screws.

11. Go to the section in this chapter on “Installing the Ethernet 

Cable.”

 

1. Turn off, and unplug the printer.

2. Attach the wrist portion of the antistatic strap to your wrist. 

Attach the other end of the strap to the metal plate on the back 
of the printer.