Kodak 8660 Manuel D’Utilisation

Part No. 6B4389

June 1999

3-17

The serial port always operates at 9600 bps with no parity, XON/
XOFF flow control, and 8-bit characters when in console mode. 
Make sure that your terminal is set to these parameters. 

NOTE: Refer to Appendix B for a summary of commands and 

syntaxes for use with XConfig, Telnet or serial port 
sessions with the NIC.

Some NIC parameters can be configured from the printer’s 
display panel.

Keys on the printer control panel can be used to:

•

enter the Setup menu (Setup/Select key). 

•

scroll up through menus (Print key). 

•

scroll down through menus (Cancel key).

•

select items (Setup/Select key).

Setup menu items can either be viewed for status or configured to 
accommodate your network printing environment. Use the scroll 
keys to scroll to the next number.

1.

When the printer is in the Ready state, select Setup.

2.

Scroll through the menu items to select Status or Ports for 
NIC parameters.

3.

Exit the setup mode.

4.

Reset the NIC to save any configuration changes. 

The following items are available on the Status menu for the NIC:

Status>

NIC>

Serial #

FW Version

Link