Kodak 8660 Manuel D’Utilisation

6-4

Part No. 6B4389  June 1999

Refer to your NWAdmin documentation for specific details on 
using NWAdmin.

Make sure that you are logged in as Admin in NDS mode on the 
NetWare 4.xx file server.

To configure the NIC using NWAdmin:

1.

Select the desired organizational unit that will contain the 
new printer.

2.

Create/Add a new printer object with the name of the printer 
(NIC).

3.

Select the desired container object (organizational unit) that 
will contain the default print queue. 

4.

Create a new print queue.

5.

Select the print queue and assign the print queue to the 
printer you created. 

6.

Exit NWAdmin.

Refer to your JetAdmin documentation for specific details on the 
use of JetAdmin.

NOTE: The same service cannot be used for both queue server 

mode and remote printer mode. If you wish to enable 
remote printer capabilities or services other than the 
default NetWare services, you must define the new 
services that are enabled for NetWare and for the desired 
port.

1.

Double-click on the icon for JetAdmin or XAdmin. Select the 
name of the NIC from the list 

NOTE: The default name of the NIC is KOD_xxxxxx.

2.

From JetAdmin or Xadmin, select the remote printer as the 
operating mode. Select the name of your printer/NIC as the 
print server name, and select the number of the printer you 
made a note of as the printer number.

3.

Select the desired default printer driver.