Kodak 8660 Manuel D’Utilisation

Part No. 6B4389

June 1999

6-7

The following steps describe how to use the standard Novell 
PCONSOLE utility with XCONFIG to set up your print queues.

1.

Log in as Supervisor for Netware 3.xx or as ADMIN for 
NetWare 4.xx. Make sure that you specify the /b option for 
bindery mode.

2.

Run the PCONSOLE utility from your PC workstation.

3.

Select Print Servers from the available Options menu.

4.

To create a new print server, enter the NIC Netware service 
name. The default name is KOD_xxxxxx. The xxxxxx is the 
last 6 digits of the Ethernet address. Press ENTER.

5.

Create a new queue on the file server. Enter the new queue 
name, and press ENTER.

NOTE: The name does not need to be related to the name of the 

NIC print server resources, but it should be short and 
convenient for users to remember.

6.

Configure the queue by selecting Print or Queue Servers and 
specify which network print servers can print jobs from this 
print queue.

7.

Select the NIC NetWare service name to add it to the list.

8.

Exit PCONSOLE.

9.

To force the NIC to rescan the file servers for print jobs, turn 
the printer off and then on.

NOTE: You may also use the XConfig command SET NETWARE 

RESCAN to force the NIC to rescan for file servers.