Lenovo 9623 Manuel D’Utilisation
Replacing the internal speaker
Attention
Do not open your computer or attempt any repair before reading and understanding the
“Important safety information” in the ThinkCentre Safety and Warranty Guide that came with
your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:
http://www.lenovo.com/support
“Important safety information” in the ThinkCentre Safety and Warranty Guide that came with
your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:
http://www.lenovo.com/support
This section provides instructions on how to replace the internal speaker.
To replace the internal speaker:
1.
1.
Remove all media from the drives and turn off all attached devices and the
computer. Then, disconnect all power cords from electrical outlets and
disconnect all cables that are connected to the computer.
computer. Then, disconnect all power cords from electrical outlets and
disconnect all cables that are connected to the computer.
2.
Remove the computer cover. See “Removing the computer cover” on page 16.
3.
Locate the internal speaker connector on the system board. See “Locating parts
on the system board” on page 12.
on the system board” on page 12.
4.
Disconnect the internal speaker cable from the system board.
5.
Push the metal tab on the top of the internal speaker outward and slide the
internal speaker upward to completely remove it from the chassis.
internal speaker upward to completely remove it from the chassis.
Figure 33. Removing the old internal speaker
42
User Guide