Lenovo 567 Manuel D’Utilisation
15
SATA connectors 1 and 2 (SATA 3.0 connectors)
35
4-pin power connector
16
SATA connectors 3 and 4 (SATA 2.0 connectors)
36
Battery
17
SATA/SAS connectors for the hard disk drive (3)
37
Memory slot 1 (DIMM1)
18
Hard disk drive LED (LSI)
38
Memory slot 5 (DIMM5)
19
Cover presence switch connector (Intrusion
switch connector)
39
Memory slot 2 (DIMM2)
20
Front USB connector 1 (for connecting USB
ports 1 and 2 on the front bezel)
40
Memory slot 6 (DIMM6)
Locating internal drives
Internal drives are devices that your computer uses to read and store data. You can add drives to your
computer to increase storage capacity and enable your computer to read other types of media. Internal
drives are installed in bays. In this manual, the bays are referred to as bay 1, bay 2, and so on.
computer to increase storage capacity and enable your computer to read other types of media. Internal
drives are installed in bays. In this manual, the bays are referred to as bay 1, bay 2, and so on.
When installing or replacing an internal drive, it is important to note the type and size of the drive that you
can install or replace in each bay and correctly connect the cables to the drive installed. Refer to the
appropriate section in “Installing or replacing hardware” on page 29 for instructions on how to install or
replace internal drives for your computer.
can install or replace in each bay and correctly connect the cables to the drive installed. Refer to the
appropriate section in “Installing or replacing hardware” on page 29 for instructions on how to install or
replace internal drives for your computer.
Figure 5 “Drive bay locations” on page 12 shows the locations of the drive bays.
Figure 5. Drive bay locations
12
ThinkStation User Guide