Lenovo 10AB000KUS Manuel D’Utilisation
Locating internal drives
Internal drives are devices that your computer uses to read and store data. You can add drives to your
computer to increase storage capacity and enable your computer to read other types of media. Internal
drives are installed in bays.
computer to increase storage capacity and enable your computer to read other types of media. Internal
drives are installed in bays.
When installing or replacing an internal drive, it is important to note the type and size of the drive that you
can install or replace in each bay and correctly connect the cables to the drive installed. Refer to the
appropriate section in “Installing or replacing hardware” on page 39 for instructions on how to install or
replace internal drives for your computer.
can install or replace in each bay and correctly connect the cables to the drive installed. Refer to the
appropriate section in “Installing or replacing hardware” on page 39 for instructions on how to install or
replace internal drives for your computer.
Figure 7 “Drive bay locations” on page 16 shows the locations of the drive bays.
Figure 7. Drive bay locations
1
Bay 1 - Primary optical drive bay (with an optical drive available in some models)
2
Bay 2 - Secondary optical drive bay
3
Bay 3 - Card reader drive bay or mSATA solid-state drive bay
4
Bay 4 - Primary SATA hard disk drive bay (for installing a 3.5-inch SATA hard disk drive or a 2.5-inch SATA
solid-state drive)
5
Bay 5 - Secondary SATA hard disk drive bay (for installing a 3.5-inch SATA hard disk drive or a 2.5-inch SATA
solid-state drive)
16
ThinkCentre M83, M93/p User Guide