Packard Bell M5801 Manuel D’Utilisation
93
Follow these instructions to install an add-on card:
1.
Remove a blanking plate from the system case corresponding to the slot you are going to
use.
use.
2.
Install the edge connector of the add-on card into the expansion slot. Ensure that the edge
connector is correctly seated in the slot.
connector is correctly seated in the slot.
3.
Secure the metal bracket of the card to the system case with a screw.
1.For some add-on cards, for example graphics adapters and network adapters,
you have to install drivers and software before you can begin using the add-on
card.
card.
2. The onboard PCI interface does not support 64-bit SCSI cards.