Shuttle Computer Group 74RKD20005SHU001 Manuel D’Utilisation

Page de 120
P
RODUCT
 O
VERVIEW
A
UTO
 M
IRRORING
3-21
En
glish
2. Under Formatted Capacity, select a drive and click Format.
 
Formatting Disk Function
3. A prompt displays to confirm, click OK to continue.
The process continues. When it is complete, the Disk Manager screen displays.
Auto Mirroring
By using RAID 1, you can duplicate data between two hard drives. A minimum of two 
HDDs are required for auto mirroring (RAID 1). The Auto Mirror function allows you to 
enable or disable the Auto Mirror function available for RAID 1 mode.
A second hard drive must be installed prior to enabling the auto mirroring function. 
Note:
Auto mirroring is only available for RAID 1 mode. Depending on the type and 
size of HDDs, the rebuilding of your second drive for mirroring may take several 
hours. Do not turn off the power or interrupt the system during this process to 
prevent damage to the system or your hard drives. 
The auto mirroring setup will require the formatting of the new drive. Make sure 
you backup all data before starting this process.
To insert a HDD in an empty tray:
1. Power down the system before starting, and remove the empty HDD tray. See