Toshiba Satellite/Satellite PRO T230D SERIES Manuel D’Utilisation
Error! Style not defined. Error! Style not defined.
4 Replacement Procedures
2. Remove the two M2x3 screws and remove the HDD by pulling the tab attached to the
HDD.
OUT
IN
M2×3*2
Figure 4.3 Removing the HDD
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or
replace the HDD pack only if it fails.
replace the HDD pack only if it fails.
3. Place the HDD pack on a flat surface such as a desk.
4. Remove the four M3x3 screws and separate the bracket from the HDD.
4
3
2
1
M3×3*4
Figure 4.4 Removing the HDD bracket
Satellite/Satellite PRO T230D Maintenance Manual
4-11