Toshiba Satellite/Satellite PRO T230D SERIES Manuel D’Utilisation
Error! Style not defined. Error! Style not defined.
4 Replacement Procedures
4.1
General
This chapter explains how to disassemble the laptop and replace Field Replaceable Units (FRUs).
Some replacement procedures may not require you to remove all the surrounding FRUs to
replace only one FRU. The chart below shows the FRUs in the order in which they should be
removed in a top-down manner, irrespective of their physical locations. The FRUs shown in the
top area of the chart should normally be removed before removing the FRUs shown in the
bottom area. To replace the FRUs, first identify the suspect FRU for the system failure. Next,
according to this chart, determine the FRUs that need to be removed before removing the suspect
FRU. After you determine those FRUs, go to the appropriate sections according to the section
numbers shown in the boxes. Then, start removal and replacement.
Some replacement procedures may not require you to remove all the surrounding FRUs to
replace only one FRU. The chart below shows the FRUs in the order in which they should be
removed in a top-down manner, irrespective of their physical locations. The FRUs shown in the
top area of the chart should normally be removed before removing the FRUs shown in the
bottom area. To replace the FRUs, first identify the suspect FRU for the system failure. Next,
according to this chart, determine the FRUs that need to be removed before removing the suspect
FRU. After you determine those FRUs, go to the appropriate sections according to the section
numbers shown in the boxes. Then, start removal and replacement.
4.2 Battery
4.3 HDD
4.4 Memory
4.5 Keyboard
4.6 Logic Upper
Assembly
4.9 RGB Board
4.17 Speakers
4.13 Display Assembly
4.20 Motherboard
4.14 USB & Audio Board
4.15 HDD Board
4.21 Thermal Module
4.22 LCD Bezel
4.23 LCD Module
4.24 Camera Board
4.8 Power Board
4.19 Thermal Fan
4.18 Bluetooth Combined With Cable Module
4.10 WLAN Card
4.16 LED Board
4.7 Touch Pad
Bracket and Touch
Pad Button Board
4.25 Antennas for WLAN
4.11 WWAN Card
4.12 Minicard Brackets
How to use the chart (two examples):
For removing the Motherboard:
First, remove parts from 4.5-4.6,
For removing the Motherboard:
First, remove parts from 4.5-4.6,
Keyboard to Logic Upper Assembly
and then parts 4.13-4.19, RGB Board
to Thermal Fan.
and then parts 4.13-4.19, RGB Board
to Thermal Fan.
For removing the LCD Module:
First, remove 4.22 LCD Bezel, then
First, remove 4.22 LCD Bezel, then
remove 4.23 LCD Module.
4.2 Battery
4.3 HDD
4.4 Memory
4.5 Keyboard
4.6 Logic Upper
Assembly
4.9 RGB Board
4.17 Speakers
4.13 Display Assembly
4.20 Motherboard
4.14 USB & Audio Board
4.15 HDD Board
4.21 Thermal Module
4.22 LCD Bezel
4.23 LCD Module
4.24 Camera Board
4.8 Power Board
4.19 Thermal Fan
4.18 Bluetooth Combined With Cable Module
4.10 WLAN Card
4.16 LED Board
4.7 Touch Pad
Bracket and Touch
Pad Button Board
4.25 Antennas for WLAN
4.11 WWAN Card
4.12 Minicard Brackets
Satellite/Satellite PRO T230D Maintenance Manual
4-1