Tyan Computer B4881V50S4H Manuel D’Utilisation

The product is shipped with a SATA back-
plane. To install hot-swap SCSI drives, the 
optional SCSI backplane must be fitted.

5. Insert the drive tray back into the chassis and push the 

locking lever into place to secure it.

The B4881V50S4H ships with four drive bays that can each 
accommodate a standard SCSI, SATA, or IDE hard disk. 

1. Attach a rail to each side of new hard disk. Ensure that 

the locking clip faces the rear of the drive. Use two 
screws for each rail.

2. Remove the chassis cover. See Removing the chassis