Toshiba 5205 Series Mode D'Emploi
49
Getting Started
Setting up your computer
5.375 x 8.375 ver 2.4.0
Installing additional memory (optional)
Your computer comes with enough memory to run most of
today’s popular applications. You may want to increase the
computer’s memory if you use complex software or process
large amounts of data.
today’s popular applications. You may want to increase the
computer’s memory if you use complex software or process
large amounts of data.
There are two memory slots. Your system may have both
slots occupied.
slots occupied.
You need a standard Phillips no. 1 screwdriver to install a
memory module.
memory module.
CAUTION: To avoid damaging the computer’s screws, use a
standard Phillips no. 1 screwdriver that is in good condition.
standard Phillips no. 1 screwdriver that is in good condition.
CAUTION: Do not install or remove a memory module while the
DVD-ROM drive power is on.
DVD-ROM drive power is on.
If the computer is on, begin at step 1; otherwise, skip to step
3.
3.
1
If the computer is on, click Start, Turn Off Computer.
The Turn off computer window appears.
2
Click Turn Off.
The operating system turns off the computer.
3
Unplug and remove any cables connected to the
computer.
computer.
4
Remove the battery.
5
Close the display panel and turn the computer upside
down to locate the expansion memory slot cover to the
memory slot.
down to locate the expansion memory slot cover to the
memory slot.