Epson 320SX PLUS Manuel D’Utilisation

If you have a composite color monitor, such as a color
television with a video input, try selecting Co1or

80x25. If you find that the monitor’s resolution is poor,

run SETUP again and select Co1or 40x25.

If you have two display adapters of different types, select the
setting for the one you want to be your primary display

adapter. The other one is your secondary adapter.

If you have installed an EGA or VGA display adapter card,

or another type of card that you want to be the primary
display adapter, you must set jumper Jl on the main
system board to disable the built-in VGA interface.

If you install one type of display adapter card and then
change the type of monitor you are using (from color to

monochrome, or vice-versa), you also need to set jumper

J3. If you have two types of cards, set the jumper to match

the monitor that is your primary display. See Chapter 6 for

instructions on changing jumper settings.

Setting the Keyboard Test function

There are two options for the keyboard test function:

Installed or Not installed. Select Installed if you want the
computer to test the operation of the keyboard each time you
turn it on or reset it. Select 

if you want the

computer to skip the keyboard test to save time as you boot

the system.