Epson 320SX PLUS Manuel D’Utilisation

The built-in serial port in your computer is set to act as the

primary port (COMl). If you install an option card that
provides an additional serial port, that port automatically
becomes secondary (COM2). However, if you want the port

on the card to be COMl, select COM2 for the built-in port.

If you install a card (or cards) that provides two additional

serial ports and you want them to act as the primary and
secondary ports, select 

for the built-in port.

Be sure to set any jumper(s) on the card(s) to indicate

whether you want the port(s) to be primary or secondary.

If you are using the standard drives that came with your

computer, the hard disk drive controller (HDC) and diskette
drive controller (PDC) should 

However, if you install an option card that provides a

controller for a diskette drive or hard disk drive, you need to
disable the built-in controller.

After you have made your selections for SETUP, press 

to

exit. You see the following prompt:

Press Esc to return to the menu to make corrections. Press Y
and 

to save the settings in the CMOS RAM. Press 

and

to exit SETUP without saving your changes.