Epson 286 PLUS Manuel D’Utilisation

3.

Cover the option slot opening with the original metal cover

and secure it with the retaining screw.

4.

if you are removing an option card that controls a mouse,

you need to change the setting of jumper J4 on the main
system board. If you are removing a display adapter card, you

may need to change the settings of jumpers J1,J3, and J5.

See page 5-7 for instructions.

5.

Replace the cover. See page 5-41 for instructions.

In order to access the SIMM sockets, jumpers J5 and J6, and the

math coprocessor socket on your computer’s main system board,

you need to remove the subassembly that covers them. The

subassembly is the large metal casing that holds the horizontal

drive bays and the power supply, as shown below.

subassembly

5- I 8

Installing 

Removing Options