Epson 286 PLUS Manuel D’Utilisation

When the SIMM is at an angle, release the tabs and

carefully remove it from the socket.

5.

Repeat step 4 for each SIMM you need to remove.

6.

Replace the subassembly. See page 5-33.

7.

Follow the steps on page 5-41 to replace the computer’s

cover. Then see “Post-installation Setup” (following that
section) for instructions on configuring your computer for
use with your decreased memory.

Your computer has a socket on the main system board to

accommodate an 80287 (8 or 10 MHz) math coprocessor. A

math coprocessor speeds up the numeric calculations your
computer performs when 

application software. It

also increases the speed at which graphic images are displayed

on your monitor when you use graphics-oriented software.

It is best to have your dealer install a math coprocessor for you,

since it is a delicate component that can be damaged easily if it

is installed incorrectly.

If you install it yourself, be sure to read the manual that came

with your math coprocessor, if you received one. Then follow

the steps in this section to install it in your computer. Before you

begin, be sure to read all of the warnings and instructions

carefully so you do not injure yourself or damage the coprocessor

or your computer.

Caution

To avoid generating static electricity and damaging your

math coprocessor, remain stationary when you install it.

Installing and Removing Options