Epson 286 PLUS Manuel D’Utilisation

If you need to remove a math coprocessor from your computer,

contact your dealer for assistance. You need a special extracting

tool to remove the coprocessor without damaging it. Do not

attempt to remove it without this tool; you can easily damage it.

Follow the steps described earlier in this chapter to remove the

subassembly. Then remove the coprocessor with the tool and
replace the subassembly and the computer’s cover.

After you remove the coprocessor, run the SETUP program to

configure your system for use without it. See Chapter 2 for

instructions.

Follow the steps below to replace the subassembly inside your

computer:

1.

Notice that there are four mounting slots on the back of the

subassembly: two in the upper corners and two in the lower
corners.

lower slots

Installing and Removing Options

5-33