Epson 286 PLUS Manuel D’Utilisation

Then place the flat side of the mounting plate on the hard

disk drive and align the four holes on the mounting plate
with the four holes on the bottom of the drive, as shown
below.

4.

Locate the four screws that you removed from the 21/4-inch

mounting frames and use them to secure the mounting plate

to the hard disk drive.

Follow these steps to install the hard disk drive in the vertical
mounting position:

1.

Locate the hard disk drive ribbon cable that came in the box

with your computer. 

It 

is a flat cable with three connectors

on it (one on each end and one in the middle).

B-12

Installing