Epson 286 PLUS Manuel D’Utilisation

The procedure you use to connect your monitor to the computer
depends on the type of monitor you have. If you have a VGA

monitor (or a multi-frequency monitor with an analog
connector), you can connect it to the computer’s built-in VGA

port. See “Using the VGA Interface” below. If you have any

other type of monitor, see “Using a Display Adapter Card”

below.

Follow these steps to connect your VGA monitor to the VGA
port on the computer:

1.

Make sure your monitor is turned off.

2.

Place your monitor on top of or near the computer. For easy

access, turn the monitor and computer around so the backs

of both components are facing you.

3.

If necessary, connect the monitor cable to the monitor.

(Your monitor may have a permanently attached cable.)

Setting Up Your System