Epson 286 PLUS Manuel D’Utilisation

2 .

If you installed the drive yourself, did you carefully follow all

the instructions in Appendix B of this manual? Review the

instructions and check all the cable connections to make

sure you have installed it correctly.

3.

Did you run the SETUP program to define the correct type

of diskette drive as part of the computer’s configuration?

(See Chapter 2 for instructions.)

4.

If you are still having trouble with the drive, run the Floppy

disk system diagnostics tests, described in Appendix C. If

the diagnostics program indicates an error, consult your
Epson dealer.

5.

If the diskette drive is making loud or unusual noises,
contact your Epson dealer.

If you are having a problem with your hard disk, it could be the

result of improper installation, incomplete disk preparation, or
corrupted data. The suggestions in this section are divided into

three categories:

 Installing the drive

Preparing the drive for use

Accessing data on the drive.

Consult the section that seems most likely to cover the problem

you are having. For example, if you have been able to use data

on your disk in the past but suddenly cannot, see “Accessing

Data on the Drive.”

D-12 Troubleshooting