Epson 286 PLUS Manuel D’Utilisation

If you have a printer, a modem, or other peripheral device with a
serial interface, you can connect it to the serial (RS-232C) port
on the back of the computer.

The serial port uses a DB-9P connector, so be sure you have a

compatible cable. To connect a serial device, follow the same
steps as above for connecting a parallel device but insert the

connector into the serial port, marked with a special icon, as

shown below.

You need to ensure that the serial port is set up so it functions

properly. If you are using the port for a serial printer, you need

to redirect printer output to the serial port instead of the

parallel port. To do this, you can use the MS-DOS MODE

or SETMODE command or the MENU utility. See your

MS-DOS Reference Manual for instructions.