Epson LT-286 Manuel D’Utilisation

To change the main memory setting, highlight 

Main. 

Then press

one or more times until the correct value appears.

To change the expansion memory setting, highlight 

Expansion.

Then press the + key (either the gray + on the right side of the
keyboard or the white + next to the backspace key) until the

correct value appears.

For example, if you have installed a 2MB memory expansion
module, press the + key until 2048KB appears. If you have installed

two 2MB expansion modules, press the + key until 4096KB

appears.

When you have finished making changes to the memory settings,

highlight 

SAVE 

SETTINGS

 

and press 

The setup program assumes that you are using either the built-in

LCD screen in its normal 80-column mode or a color monitor

(attached to the CRT connector) in 80-column mode. If this

information is correct, you do not need to make any changes to the

Display 

portion of the setup program.

To change the display information recorded by the setup program

or to confirm that the current settings are correct, highlight

Display 

and press 

The following screen appears:

Exit

Memory

Display

Coprocessor

Mass storage

Backlight period

Gray scale

2-4

Running the Setup Program