Epson 386/25 Manuel D’Utilisation

Caution

Do not reset the computer as a means to exit a program.

Some programs classify and store new data when you 

exit a

program in the normal manner. 

If you reset the computer

without properly exiting a 

program, you may lose data.

To reset the computer, MS-DOS must be either on the hard disk
or on a diskette in drive A; so if you do not have a hard disk,

insert the Startup diskette in drive A.

There are two ways to reset the computer:

❏ If you are using MS-DOS, hold down Ctrl and Alt and press

the Del key. The screen goes blank for a moment and then
the computer should reload MS-DOS. If it doesn’t, try the

next method.

❏

Press the RESET button on the front panel. This method

works even when the computer does not respond to your
keyboard entries.

If resetting the computer does not correct the problem, you

probably need to turn it off and reboot it. Remove any

diskette(s) from the diskette drive(s). Turn off the computer

and wait five seconds. If you do not have a hard disk, insert the

Startup diskette in drive A. Then turn on the computer.

3-6

Using Your Computer