Epson 468C Manuel D’Utilisation

If

VGA/PGA/EGA* You connected your monitor to the built-in VGA port or

you installed a VGA or enhanced graphics adapter

(EGA) card

Color 40x25

You installed an optional color graphics adapter that is
set to 40-column CGA mode

Color 80x25

You installed a color graphics adapter (CGA) or a

multi-mode graphics adapter (MGA) attached to a

color monitor; be sure to set the color/mono switch on
the MGA card to color

Monochrome

You installed a monochrome display adapter (MDA).

an MGA, or a Hercules

®

 MGA attached to a

monochrome monitor; be sure to set the color/mono

switch on the MGA card to mono

l 

Default setting

For a composite color monitor, such as a color television with

video input, try selecting Color 80x25. If the monitor’s

resolution is poor, run SETUP again and select Color 40x25.

If you have two display adapters of different types, select the

setting for the one you want to be your primary display

adapter. The other one is your secondary adapter.

If you install one type of display adapter card and then change

the adapter (from VGA to CGA or vice-versa), you also may

need to change the setting of DIP switch 5. If you have two

types of cards, set the jumper and DIP switch to match the

adapter controlling your primary display. See Chapter 4 for

instructions on changing jumper settings and the manual that

came with your monitor for additional information.